Metal seated valves

Microfinish robust metal seated ball valve line outperforms in the harshest industrial conditions; this includes extreme high temperature up to 650°C / 1200°F, abrasive medium such as fly-ash, slurry, and pulp applications, and pressures as high as class 2500. 

By default Microfinish metal seated ball valve line exceeds FCI-70-2 Class V leak rate with outstanding repeatability. Class VI leak rate is also feasible upon special request, and post Microfinish engineering team approval.

Various hardening techniques are available with Microfinish;Nickel plating, Chromium plating, Nitriding of austenitic stainless steel, Plasma Thermal Arc (PTA) welding of Stellite, and High Velocity Oxygen Fuel (HVOF) spray technique of Tungsten Carbide or Chromium carbide over cobalt base layer; each technique is sized carefully to meet the application parameters.

Microfinish metal seated ball valve line splits to floating ball valve, from ½ inch (DN15) to 10 inch (DN250), and trunnion mounted ball valve, from 2 inch (DN50) and up to 48 inch (DN1200), both lines are available in reduced bore and full bore, and pressure classes from ASME 150 to 2500. 

Applicable standards

Design standard API 6D, API 608, ASME B16.34, ISO 17292
Testing standard API 6D, API 598, EN 12266-1, ISO 5208
Fugitive emission TA-Luft, ISO 15848-1, API 641
Flange standard ASME B16.5
Weld ends ASME B16.25
Fire safe testing API 607, API 6FA, ISO 10497
Sour gas service NACE MR0175 / ISO 15156 and NACE MR0103 / ISO17945
Documentation EN 10204 type 2.2 (default) / 3.1 / 3.2    

Back To Top